具体过程如下:
[ddt@localhost softwear]$ sh check.sh
Detected configuration:
Architecture: i686 (32-bit)
X Server: Xorg 6.8.1
检查完后
下了一个x.org 6.8 的
rpm -uvh --nodeps fglrx_6_8_0-8.12.10-1.i386.rpm
提示冲突 libGL
删了原来哪个 就好了
装完后
配fglrxconfig基本默认
==============================================================================
ATI - FIRE GL - BE THE CREATOR
==============================================================================
This program will create the ATI "xorg.conf" file
- based on your selections - for the below listed boardtypes...
- ATI Radeon 8500 / 9100
- ATI FireGL 8700 / 8800 / E1
- ATI FireGL T2
- ATI Radeon 9000
- ATI Radeon 9200
- ATI Radeon 9500
- ATI Radeon 9600
- ATI Radeon 9700
- ATI Radeon 9800
- ATI FireGL Z1 / X1 / X2
- ATI Mobility M9
- ATI Mobility FireGL 9000
- ATI Mobility M9PLUS
The "xorg.conf" file usually resides in /etc/X11.
Press [Enter] to continue, press 'q'&[Enter] or [Ctrl]+'c' to abort.
==============================================================================
Mouse
==============================================================================
Specify the mouse port type. Choose one from the following list:
1. Serial Port
2. PS/2 or USB with PS/2 protocol
3. Inport Bus
Enter the number for your port type: [2]
Specify the mouse model. Choose one from the following list:
1. PS/2 Mouse (X11 generic ps/2 mouse driver)
2. PS/2 Wheel Mouse (X11 generic ps/2 wheel mouse driver)
3. Microsoft Intellimouse (PS2)
4. Microsoft IntelliMouse Explorer (PS2)
5. Kensington ThinkingMouse (PS2)
6. Logitech MouseManPlus (PS2)
7. Alps Glidepoint PS/2 Touchpad
8. Genius NetMouse
9. Genius NetScroll
Enter the number for your mouse model: [2]
If your mouse has only two buttons, it is recommended that you enable
Emulate3Buttons.
Do you want to enable Emulate3Buttons (y/n)? [n]
Now give the full device name that the mouse is connected to, for example
/dev/tty00 or /dev/mouse or /dev/psaux (includes IBM Laptops).
Mouse device: [/dev/input/mice]
==============================================================================
Keyboard
==============================================================================
Please select one of the following keyboard types that is the better
description of your keyboard. If nothing really matches,
choose 1 (Generic 101-key PC)
1. Generic 101-key PC
2. Generic 102-key (Intl) PC
3. Generic 104-key PC
4. Generic 105-key (Intl) PC
5. Dell 101-key PC
6. Everex STEPnote
7. Keytronic FlexPro
8. Microsoft Natural
9. Northgate OmniKey 101
10. Winbook Model XP5
11. Japanese 106-key
12. PC-98xx Series
Enter a number to choose the keyboard type: [1]
Please select the layout corresponding to your keyboard
1. U.S. English
2. U.S. English w/ISO9995-3
3. Belgian
4. Bulgarian
5. Canadian
6. Czechoslovakian
7. German
8. Swiss German
9. Danish
10. Spanish
11. Finnish
12. French
13. Swiss French
14. United Kingdom
15. Hungarian
16. Italian
17. Japanese
18. Norwegian
Press [Enter] for the next page or
enter the number for your keyboard layout country: 1
==============================================================================
FireGL Display Settings
==============================================================================
Quad Buffer Stereo ("Active Stereo"):
This driver does support Quad Buffer Stereo ("Active Stereo")
in combination with a CRT monitor (refresh rate abt. 100 to 120 Hz)
and the appropiate stereo viewing subsystem hardware. This can be
e.g. a shutter glasses system (infrared or wired) or an active
polarisation device paired with passive stereo polarization glasses.
Do you want to enable "Quad Buffer Stereo" (y/n)? [n]
==============================================================================
TV out Configuration
==============================================================================
Do you want to enable TV out (y/n)? [n]
==============================================================================
FireGL Screen Layout
==============================================================================
------------------------------------------------------------------------------
| Maximum resolution for OpenGL operation |
| |
| - R200 chip family (Radeon 8500-9100 Pro, FireGL 8700/8800/E1): |
| 2048x2048 |
| - R300 chip family (Radeon 9500-9700 Pro, FireGL T2/Z1/X1/X2): |
| 2560x2560 |
------------------------------------------------------------------------------
Choose configuration from the list below
1. Single Head (1 screen, second dark)
2. Laptop Mode (Ability to toggle between internal / external screen)
3. Clone Mode (2 screens - same content)
4. Big Desktop (2 screens - one framebuffer)
5. Dual Head (2 screens - two drivers)
Enter the number for your configuration: [1]
==============================================================================
Single Head selected
==============================================================================
==============================================================================
Monitor Settings
==============================================================================
Now we want to set the specifications of the monitor(s). The two critical
parameters are the vertical refresh rate, which is the rate at which the
the whole screen is refreshed, and most importantly the horizontal sync rate,
which is the rate at which scanlines are displayed.
The valid range for horizontal sync and vertical sync should be documented
in the manual of your monitor. If in doubt, check the monitor database
/usr/X11R6/lib/X11/doc/Monitors to see if your monitor is there.
Press [Enter] to continue, press 'q'&[Enter] or [Ctrl]+'c' to abort.
You must indicate the horizontal sync range of your monitor. You can either
select one of the predefined ranges below that correspond to industry-
standard monitor types, or give a specific range.
It is VERY IMPORTANT that you do not specify a monitor type with a horizontal
sync range that is beyond the capabilities of your monitor. If in doubt,
choose a conservative setting.
hsync in kHz; monitor type with characteristic modes
1. 31.5 ; up to 640x480 @ 60 Hz (VGA)
2. 31.5 - 37.9; up to 800x600 @ 60 Hz (SVGA)
3. 31.5 - 48.4; up to 1024x768 @ 60 Hz (XGA)
4. 31.5 - 60.0; up to 1024x768 @ 75 Hz (XGA)
5. 31.5 - 68.7; up to 1024x768 @ 85 Hz (XGA)
6. 31.5 - 80.5; up to 1280x1024 @ 75 Hz (SXGA)
7. 31.5 - 91.1; up to 1280x1024 @ 85 Hz (SXGA)
8. Enter your own horizontal sync range
Enter your choice (1-8): [1] 5
You must indicate the vertical sync range of your monitor. You can either
select one of the predefined ranges below or give a specific range.
1. 20 - 60 (e.g. slow scan flat panels with DVI cable)
2. 50 - 70 (VGA)
3. 60 - 75
4. 60 - 85
5. 60 - 100
6. Specify your own vertical sync range
Enter your choice: [1] 2
==============================================================================
Display Modes
==============================================================================
The default resolution that the server will start-up with will be the first
listed mode that can be supported by the monitor and card.
Currently it is set to:
"640x480" for 24-bit
Modes that cannot be supported due to monitor or clock constraints will
be automatically skipped by the server.
1. Change the modes for 24-bit (24-bit color)
2. The modes are OK, continue.
Enter your choice: 2
You can have a virtual screen (desktop), which is screen area that is larger
than the physical screen and which is panned by moving the mouse to the edge
of the screen. The largest resolution in the modelist is used for any of the
listed resolution with less dimensions. Each color depth can have a
differently-sized virtual screen. Virtual screens resolutions are set
for each color depth separately.
Note: This grafics adapter will always select the maximum
x and y resolution as the default virtual desktop resolution.
This complies with general X11 specifications. see "man XF86Config".
Do you want to use a virtual desktop where the dimensions are bigger
than your maximum x and y screen resolution? (y/n) [n]
==============================================================================
Direct Rendering Interface Restrictions
==============================================================================
Please specify which restriction sheme you want to implement:
1. no restrictions - any user has access to the OpenGL ICD
2. limited to group 'users' - only group members can access the OpenGL ICD
3. limited to group 'root' - only group members can access the OpenGL ICD
4. limited to group 'video' - only group members can access the OpenGL ICD
5. limited to group 'dri' - only group members can access the OpenGL ICD
Enter the number for your default user restrictions: [1]
==============================================================================
Application Profiles
==============================================================================
Please select application specific profile:
1. Default
2. Individual Configuration of Capabilities
3. Maya
4. SOFTIMAGE|XSI
5. SOFTIMAGE|3D
6. Houdini 4.0
7. Houdini 5.0
8. Houdini 5.5
Enter the number for your profile: [1]
==============================================================================
Advanced Graphics Features Settings
==============================================================================
Do you want to initialize xfree86-dga (y/n)? [n]
Do you want to export pseudo color visuals (y/n)? [n]
Do you want to synchronize buffer swaps
with the vertical sync signal (y/n)? [n]
==============================================================================
Full Scene Anti Aliasing (FSAA)
==============================================================================
Please select multi sample visuals you want to share:
1 = All (Visuals for 2,4 and 6 Samples per Pixel)
2 = Visuals for 2 Samples per Pixel
4 = Visuals for 4 Samples per Pixel
6 = Visuals for 6 Samples per Pixel
Please enter: [1]
Do you want to force multi sample visuals
for every OpenGL application? (y/n)? [n]
Disable FSAA Gamma (y/n)? [n]
Customize FSAA Multi Sample Position (y/n)? [n]
==============================================================================
Advanced OS Settings
==============================================================================
External AGPGART module:
It is possible (but not recommended) to turn off the usage of
built-in agp support of the provided fglrx kernel module and
use the external AGP GART module (agpgart.o) of the Linux kernel.
If you want to use the external module then ensure that it loads
prior to the drivers full startup. In order to manually load the
external agpgart module execute this on the commandline (as root):
/sbin/insmod agpgart
or alternatively configure your system to auto load the module.
Do you want to use the external AGP GART module (y/n)? [n]
AGP Locked User Pages
The grafics driver is able to read and write textures and bitmaps trough AGP
mapped and locked views of the main memory for the application's mem space.
Performing those mapping task depends on several successfull interaction steps
with the Linux kernel. A failure in this process might lead to some messages
in the kernel log. If these kernel functions are failing silently or in case
of other heavy incompatibility (e.g. a new kernel memory manger) then there
is a high chance that the system will hang as soon as the graphics adpater
wants to read from assumed but nor really mapped memory location.
If you do see that the advanced fgl_glxgears application halts your session
whilst the simple glxgears does run nicely then please disable this feature.
If you do see lots of notifications about failed kernel calls for mem locking
then please disable this feature and re-check the kernel message log.
Do you want to enable "AGP Locked User Pages" (y/n)? [y]
TLS Method: *** this only applys to the FireGL workstation boards ***
The grafics driver supports two different methods of thread local storage.
The first method is fast but might immediately abort when used with
WineX, VM emulators or some other advanced programming tools.
The second method is up to 10% slower in a few rendering cases
but does nicely cope with any sort of exotic software.
For more details on this topic, please see the readme.
If not totally sure about your needs, then please select "0 - default".
0 - default (FireGL workstation boards: fast)
1 - fast operation (only for standard gnu C/C++ OpenGL applications)
2 - compatible operation (for WineX, VM emulators and some profilers)
Which storage method do you want to use? [0]
==============================================================================
Finish
==============================================================================
I am going to write the xorg.conf file now. Make sure you don't accidently
overwrite a previously configured one.
Shall I write it to '/etc/X11/xorg.conf' (y/n)? y
Probing PCI bus for a supported graphics device...
unable to find any of the subsequent graphics boards:
- ATI Radeon 8500 / 9100
- ATI FireGL 8700 / 8800
- ATI FireGL E1
- ATI FireGL T2
- ATI Radeon 9000
- ATI Radeon 9200
- ATI Radeon 9500
- ATI Radeon 9600
- ATI Radeon 9700
- ATI Radeon 9800
- ATI FireGL Z1 / X1 / X2
- ATI Mobility M9
- ATI Mobility FireGL 9000
- ATI Mobility M9PLUS
When starting X11 then auto-detection will take place.
If you want forced binding to a specific PCI bus slot at a later time
then you have to edit the fglrx-BusID entry in your xorg.conf file.
Press [Enter] to continue, press 'q'&[Enter] or [Ctrl]+'c' to abort.
File has been written. Take a look at it before running 'startx'.
Note that the xorg.conf file must be in one of the directories
searched by the server (e.g. /etc/X11) in order to be used.
Within the server press ctrl, alt and 'Num+' or 'Num-' simultaneously
to cycle video resolutions.
Pressing ctrl, alt and backspace simultaneously immediately exits the server.
Use these keys if the monitor doesn't sync for a particular mode.
For further configuration, refer to /usr/X11R6/lib/X11/doc/README.Config.
分享到:
相关推荐
ATI显卡BIOS刷新工具ATI显卡BIOS刷新工具ATI显卡BIOS刷新工具
AMD/ATI显卡linux下驱动安装方法 成功率高 基于ubuntu和ubuntu衍生系统 其他发行版可以此类推
适用于linux12.0.4,这是一个显卡驱动的下载点
ATI HD系列显卡驱动安装简便方法(只有1条命令) 作者:caryloo 选择自己的显卡型号(HD)系列的驱动程序 以Linux(x86)的平台为例,分别点击 “Linux(x86)" --> "Radeon...在终端模式下进入该文件夹,运行以下命令:
ATI显卡分辨率刷新器.zip 可手动修改ATI显卡分辨率
AtiFlash linux版本 Atiflash4.25 Ubuntu18亲测可用 可刷Rx580亲测
ati显卡修改ati显卡修改ati显卡修改ati显卡修改
ati驱动是一类显卡驱动,和NVIDIA齐名,专为游戏而生的驱动,解决众多游戏不兼容问题,在可编程图形处理器方面拥有先进的专业技术,欢迎下载使用!ATI显卡驱动介绍2017最新ATI显卡驱动大全一盘在手,装机无忧!装机...
ATI显卡打游戏卡怎么办,没有关系,不会优化的人儿,来下载这个,用上高级、砖家模式,立刻提高FPS,轻松+愉快
去,ATI显卡,右键,cmd批处理,是个装机好东西
ATi显卡修改工具超频,修改频率电压,风扇转速,个人汉化
ATI显卡MAC全驱动(测试通过) PC装MAC系统必备ATI显卡驱动
ATI 显卡历史型号大全,包括ATI所有的型号
Ubuntu 安装ATI显卡驱动导致花屏的解决办法.txt
ATI Tray Tools 1.6.9.1382 Beta 官方多语绿色版_ATI显卡设置工具
ATi显示卡专用的超频和设置工具,可以使用低配置显卡玩高配置游戏
ATI显卡在Linux下一直存在着字体过小,无法在一个项目里同时访问多个实例,并且可编程性极差等缺点。在这次的更新中,不仅解决了上述问题,AMD还改善此驱动程序控制面板的用户界面。这让在Linux下设置各种显示属性,...
"ATI FireGL T2" = ati2mtag_RV350GL, PCI\VEN_1002&DEV_4154 "ATI FireGL T2 Secondary" = ati2mtag_RV350GL, PCI\VEN_1002&DEV_4174 "ATI FireGL V3100" = ati2mtag_RV370GL, PCI\VEN_1002&DEV_5B64 "ATI FireGL ...
for Ati显卡用户,这个可以清除桌面的右键菜单,Ati的相关显示项。 直接双击即可使用,快捷方便。
ATI 显卡超频图文教程详。让你自己动手修改BIOS.